Noveltex Extra Matte
SKU:Vinyl plastic paint of the highest quality with an elegant extra matte finish that helps to hide imperfections giving the walls an impeccable appearance. Thanks to its anti-drip technology it is easy to apply and has a great covering power which allows painting more, with less liters of paint. Used as a decorative and protective coating for interiors and exteriors executed with the most common construction materials (concrete, cement, plaster, fiber cement, brick, etc...). Contains additives that protect the film against mildew.
- Extraordinary Washability: Class 1
- Excelente Índice de Brillo: <5
- High Yield: 12 m2/L (1 coat)
- Excellent whiteness
- Reaction to fire Euroclass: Bs1d0
Description
Eurotex Noveltex Extra Matte vinyl paint stands out for its excellent washability and gloss index.
Main Features
- High coverage.
- Excellent brightness and whiteness unalterability.
- Conceals imperfections thanks to its excellent leveling and deep matte finish.
- Fully waterproof film.
- Extraordinary brushability. Anti-drip technology.
- Extraordinary resistance to aging.
- Very aesthetic finish.
- Extraordinary washability. High hardness film resistant to abrasion.
- Inorganic pigments stable to light, both artificial and natural, and weathering. NO yellowing.
- Non-toxic, pleasant odor and non-flammable.
Uses
- Indoors: on interior walls and ceilings, in all types of rooms in dwellings, interior spaces in offices, public premises or factories.
- In exteriors: on facades executed with common construction materials or courtyards.
Technical specifications
- Vinyl-veova binder
- Diluent Water
- Color (UNE 48103) / Finish (UNE-EN 13300) White / Deep matte
- Índice de brillo (UNE EN ISO 2813) <5
- Density at 25 ºC (UNE EN ISO 2811) 1.52 kg/L
- Krebs Stormer viscosity at 25º( UNE 48076) 115 +/- 5 KU
- Fixed matter in weight (UNE EN ISO 3251) 64 %.
- Wet scrub resistance classification (UNE-EN 13300) Class 1
- Reaction to fire classification (EUROCLASES) Class Bs1d0
- Yield at 98% opacity (UNE-EN 1300, class 2) 6 m2/L
- Drying times (UNE EN ISO 9117) To touch: 1 hour. Recoating interval: Min. 8 hours.
*Technical specifications may vary depending on color, substrate, humidity or temperature.
Treatment of the support
The substrate must be clean, dry, free of grease or contaminants, free of loose elements and free of areas affected by biodegradation that prevent the correct anchorage or affect the durability of the painting system.
- On new cement, concrete or gypsum surfaces:
If the concrete presents saline efflorescence, neutralize previously with a 10-15% solution of hydrochloric acid in water, washing then with abundant water; procedure with which it is also achieved, to roughen the smooth concrete, and then, after drying, apply the product.
- Surfaces already painted of concrete, mortar or fiber cement:
Remove dust and friable materials by mechanical or manual procedures. Painted surfaces in bad condition should be completely removed by high pressure water jet or more abrasive water jet. It is not recommended to use chemical products of acid or alkaline nature in the cleaning works since they could irreversibly damage the base support.
- On other types of supports:
The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
Mode of use
The application should be made by brush, roller or airless spray gun after homogenizing the product and dilution. The dilution of the product and cleaning of equipment and tools can be carried out using tap water before the paint dries. Once dry, cleaning solvent should be used.
Primer:
- On surfaces that present a firm, dry, absorbent and compact aspect, apply a coat of Eurotex colorless Eurofijador Eurotex diluting one part per 4 of water.
- If the substrate shows lack of consistency and high absorption, use instead Eurotex solvent-based water-repellent sealer diluted 25 - 75% with Eurosolv-X.
Finishing:
- Apply a first coat of Noveltex Extra Matte, diluting the product 10% with water. Allow to dry min. 8 hours between coats according to conditions and application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate), with a maximum dilution of 5% with water.
