Noveltex Cubremat Sky - High Quality Plastic Interior Painting
SKU:Water-based acrylic paint, slightly bluish white color, with which to obtain a smooth deep matte finish of high coverage on interior walls and ceilings.
- High coverage and good washability
- Splashed bass
- EUROCLASE BS1D0 certification ; thermal stability and good fire performance
- Color Snow White
- Theoretical yield 8.25 m2/L
Description
Noveltex Cubremat Sky has high coverage and is easy to apply.
More features
- Permeable to air and water vapor.
- Good resistance to wet rubbing.
- Good resistance to the alkalinity of the support.
- Meets the requirements of Directive 2004/42/EC on volatile organic compounds (VOC).
Applications
- Indoor use: on all types of indoor walls and ceilings made of common building materials such as cements, mortars, plaster or plasterboard.
Technical specifications
- Binder Acrylic copolymer
- Diluent Water 0 - 10 %.
- Color Snow White
- Deep matte gloss
- Classification resistance to wet scrub (UNE-EN 13300) Class 2
- Reaction to fire classification (EUROCLASES) Class Bs1d0
- Yield at 98% opacity (UNE-EN 13300, class 2) 8.25 m2/L
- Drying times (UNE 48086) Drying to touch: 30 min at 20º C. Recoating interval: 3-4 hours at 20º C.
*Technical specifications may vary depending on color, substrate, humidity or temperature.
Treatment of the support
The substrate must be clean, dry, free of grease or contaminants, free of loose elements and free of areas affected by biodegradation that prevent the correct anchorage or affect the durability of the painting system.
New concrete surfaces: Allow concrete to set completely (28 days minimum). Remove setting laitance, soluble salts, dust, grease, oil and other contaminants by mechanical or manual procedures.
Surfaces already painted of concrete, mortar or fiber cement: Remove dust and disaggregable materials by mechanical or manual procedures. Painted surfaces in bad condition should be completely removed by high pressure water jet or more abrasive water jet. It is not recommended to use chemical products of acid or alkaline nature in the cleaning works, since they could irreversibly damage the base support.
Unpainted aged surfaces: Check that surface hardness, surface cohesion and compaction are correct. Remove dust, dirt and surface contaminants by mechanical procedures. Level surface irregularities and other flaws by means of Europlaste.
On other types of substrates: The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
Instructions for use
The application should be made by brush, roller or airless spray gun after homogenizing the product and dilution. The dilution of the product and cleaning of equipment and tools can be carried out using tap water before the paint dries. Once dry, cleaning solvent should be used.
Primer:
- On surfaces that present a firm, dry, absorbent and compact aspect, apply a coat of Eurotex colorless Eurofijador Eurotex diluting 1 part per 4 of water.
Finishing:
- Apply a first coat of Noveltex Cubremat Sky, diluted 5 - 10 % with water. Let dry between coats about 3-4 hours depending on application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate) with a maximum dilution of 5% with water.
