Novolack Wood Effect
SKU:Request a quote
Synthetic lacquer type enamel that simulates color, appearance and natural grain of wood whose dry film is characterized by its high hardness, flexibility and anticorrosive power. Good coverage in a single coat.
- Colors Mahogany, Walnut and Cherry
- Satin Finish
- Reaction to fire classification (EUROCLASE) Class B s1 d0
- Theoretical yield 10 -12 m2/literand layer
- High resistance on all types of metal, mineral or wood surfaces
Description
Get natural finishes with our wood effect Novolack
Features
- Anticorrosive pigments
- Light and weather stable colors
- Good gloss and color retention
- Excellent brushability
- High solids content
- Washable
- Low odor
- Flexible
Applications
- Special enamel for painting many types of surfaces where an imitation wood finish is desired.
- It is suitable for protecting and decorating all types of metal, mineral or wooden surfaces such as doors, windows, furniture, beams or garden furniture, both indoors and outdoors.
- As it is a synthetic enamel with antirust action and due to the degree of protection it confers, it allows direct painting on steel surfaces under very specific conditions.
Technical specifications
- Thinner / Cleaner White Spirit, Turpentine or universal solvent.
- Satin Finish
- Colors: Mahogany, Walnut and Cherry.
- Reaction to fire classification (EUROCLASES) Class B s1 d0
- Theoretical coverage (35 microns dry) 10 -12 m2/liter and coat.
- Drying time 20 ºC Relative humidity 60 % To touch: 2 hours Recoating: 6 - 8 hours Through-drying: 48 hours
(*) Technical specifications may vary depending on color, substrate, humidity or temperature.
Instructions for use
- Ready to use product. It is not necessary to dilute, except when necessary due to application conditions.
- If the application requires it, dilute 5% with White Spirit, turpentine or universal solvent.
- Stir until the contents of the container are homogenized.
- Apply using a trowel at a thickness of no more than 30-35 dry microns per coat, trying to make continuous strokes in the same direction of the grain and creating undulations to create the wood effect.
- Rework before drying using a squeegeed trowel with uneven tips to obtain a more intense veining effect.
- In most cases only a single coat will be necessary, except in applications exposed to the exterior, where two coats are recommended for greater protection.
Treatment of the support
- It can be applied directly on unprimed steel surfaces. The surface must be completely degreased, free of loose materials, clean and dry at the time of application.
- Iron and steel: Remove rust and degrease the surface. Apply a coat of Europrimer E-500.
- Galvanized, aluminum, zinc: Apply one coat of Wash-Primer or Eurotex solvent based multipurpose primer.
- Wood: Sand, clean and prime with Novo-Lack Synthetic Sealer. Sand lightly and remove dust before applying Novolack Wood Effect.
Maintenance:
- Perform compatibility test for application on old paints.
- If the current paint has good adhesion, sand lightly before repainting.
- If the surface is in poor condition, all old paint must be removed, the flaws and irregularities must be repaired and the surface must be treated as if it were new.
