Tile Enamel 750ml.
SKU:Request a quote
Multi-surface water-based enamel for the decoration and restoration of bathrooms and kitchens, with very good adhesion on tiles or other types of coating of ceramic nature without the use of primer.
- Yield: 12-14m2 /L
- Excellent coverage
- Fast drying
- Resistant finish with high washability
Description
Other features
- Ceramic look finish
- High adhesion on glazed or enameled ceramic materials such as tiles
- Excellent abrasion resistance, high hardness
- Thixotropic product
Main uses
- Direct application on the tile without the use of primer.
- Renovating enamel for tiled kitchen and bathroom walls
- Suitable for the painting of bathroom and kitchen furnishings
- Suitable for application on other types of materials such as PVC or wood.
- Because it dries quickly and has little odor, it can be used in places that need to be occupied immediately, such as hospitals, public places or hotels.
Drying times
- Dry to touch: 1.5 hours
- Repainting: 6 hours
- Complete drying: 7 days
How to apply?
Support:
- Remove any remaining dirt or grease using acetone or isopropyl alcohol.
- It is advisable to sand the surface smoothly.
- In the case of repainting, if the substrate to be repainted is in good condition, sand the surface to be treated to open the pores using 280 grit sandpaper.
- If the old paint layer is very deteriorated, remove it completely by using paint strippers, mechanical or thermal systems.
Product application:
- Homogenize the contents of the container before use.
- Ready to use product. It is not necessary to dilute, except when necessary due to application conditions.
- To apply with spray gun, dilute with a maximum of 15% water.
- Apply two coats of enamel to a total thickness of about 100 µm dry, (50 µm per coat), leaving between coats the necessary time for drying.
- To obtain a smooth finish and minimize imperfections, it is advisable to apply using a brush while wet-rolling with a sponge roller or flocking without filler.
- Allow to dry completely at least 5
Note: It may be necessary to apply an extra coat when a change in the tile color or when the tile has patterns or decorative motifs.
