Novo Acrilic Plus Multisurfaces
SKU:Request a quote
Glossy water-based enamel for interior and exterior decoration , with very good adhesion on many types of substrates (for iron, galvanized, ceramic, wood, steel or light alloys ).
-
- Yield 12-14m2/L according to support
- Waterproof
- Excellent coverage
- High resistance to aging
- Solvent-free water-based product
Description
Water-based enamel for interior and exterior protection and decoration.
Where can I apply the multi-surface water-based enamel - Novo Acrilic Plus?
-
-
- Suitable for the protection and maintenance of machinery and installations, both industrial and domestic.
- Due to its fast drying and low odor, it can be used in places with immediate occupation, such as hospitals, publiccenters , hotels...
- Our new multi-surface enamel is a highly versatile product that can be applied on a large number of surfaces: light alloys, galvanized, iron, ceramic elements, wooden furniture and doors, steels, etc.
-
More features of this glossy water-based enamel:
-
-
- Easy application and excellent leveling by roller, brush or spray.
- Excellent protection for outdoor furniture.
- Fast drying and film formation time.
- Good abrasion resistance.
- Non-toxic, non-flammable.
- Good chemical resistance.
- Ready to use product. It is not necessary to dilute, except when necessary due to application conditions.
- Withstands washing and scrubbing with normal detergents
- To apply with spray gun, dilute with a maximum of 15% water.
- Drying times Touch dry 1.5 hours; Recoat 6 hours; Full dry 7 days
-
How to use Eurotex glossy enamel:
New Surfaces
-
-
- Sand the surface to be treated to open the pores.
- Remove any dirt, grease, poorly adhered rust and coatings using solvent or paint stripper.
- Apply two coats of enamel with a total thickness of about 60 µm, (30 µm per coat), leaving between coats the necessary time for drying.
- Avoid splashing and the use of abrasive elements at least 3 to 5 days after application.
-
Surfaces already painted
-
- In the case of repainting, if the substrate to be repainted is in good condition, remove any remaining grease or dirt adhered.
- Open the pores with a fine grain sandpaper, remove the remains with a damp cloth, dry and apply one or two coats of the enamel, according to needs.
- If the substrate is very deteriorated, remove any remaining paint by means of a paint stripper, mechanical or thermal systems.
- Apply two coats of enamel with a total thickness of about 60-100 µm, (30-50 µm per coat), leaving between coats the necessary time for drying.
- Avoid splashing and the use of abrasive elements after at least 3 to 5 days.
