100% Pure Acrylic Anti-Mildew Supreme

SKU:
Request a quote

High performance coating with deep smooth matte finish. Provides maximum protection and durability in facades subjected to demanding conditions. Contains additives that protect the film against mildew. Its main characteristics are:

  • Waterproof.
  • 15-year warranty.
  • BS1D0 Reaction to Fire Certificate
  • Permeable to air and water vapor.
  • High hiding power.
  • Good breathability.
  • Good whiteness index.
  • Pigments totally stable to light.
  • High resistance to wet rubbing(washability).
  • Weather and UV resistant film.
SKU: N/A Category:

Description

Technical specifications

  • Pure Acrylic Binder
  • Diluent Water
  • Color White
  • Deep matte gloss
  • Density 1.4 + 0.05 kg/liter.
  • Theoretical yield at 200 wet microns 10 m2/l
  • Yield at 98% opacity 4 .55 m2/L
  • Drying times Drying to touch: 1 - 2 hours at 20º C.
  • Recoat interval 6 - 12 hours at 20º C.

Applications

The application can be made with brush, roller or airless spray gun, after shaking the product and dilution (see Instructions for Use). The cleaning of equipment should be done with water before the paint dries. Once dry, cleaning solvent should be used.
Exterior use: Apply on facades, walls, exterior walls and light courtyards, (concrete, cement, brick, fiber cement, etc...).
● Indoor use: All types of interior walls and ceilings, on common building materials (on plaster, cement, mortar, plasterboard, etc...).

Instructions for use

  • Treatment of the support.
  1. New concrete surfaces: Allow concrete to set completely (28 days minimum). Remove setting laitance, soluble salts, dust, grease, oil and other contaminants by mechanical or manual procedures.
  2. Surfaces already painted of concrete or fiber cement: Eliminate dust and disaggregable materials by mechanical or manual procedures. Painted surfaces in poor condition should be completely removed using high pressure water machinery. Do not use chemical products of acid or alkaline nature in the cleaning works, since they could damage irreversibly the base support.
  3. On other types of substrates: The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
  • Product application.
  1. Primer: Apply a coat of Eurofijador Eurotex (WATER-BASED) diluted one part per 4 of water if the surface is firm, dry, absorbent and compact. firm, dry, absorbent and compact or EUROTEX HYDROFIX EUROTEX SEALER (SOLVENT) diluted with 25 to 75% of Eurosolv-X if the surface diluted with 25 to 75% of Eurosolv-X if the surface has a lack of consistency and high absorption.
  2. Finishing: Apply a first coat of Supreme 100% pure acrylic, diluted between 5 - 10 % with water. Let dry between coats for 6 - 12 hours depending on application conditions. Then apply one or two coats of finish (depending on the characteristics of the support) with a maximum dilution of 5% with water.



Related products


Learn more about this product