Ocean F1 Facades Premium Ocean Coating
SKU:Request a quote
High quality waterproof smooth coating, in white color and deep matte finish. It provides excellent resistance to the most adverse weather conditions, great durability and extraordinary whiteness with no yellowing index over time, thus obtaining a top quality finish.
- 10 years warranty* 10 years warranty* 10 years warranty* 10 years warranty
- CE Marking
- Maximum washability (Class 1)
- Reaction to fire certificate: Euroclass Bs1d0
- Good coverage
Description
Introducing the premium quality facade coating Océano F1; extraordinary durability and washability, as well as NON-yellowing.
Characteristics and certifications
- High durability, extraordinary resistance to aging
- Waterproof and breathable to water vapour
- Fully rain waterproof film
- Resistant to weathering and ultraviolet rays
- NO yellowing
- Chemical resistance to not excessively alkaline substrates and aggressive environments
- With anti-carbonation properties, due to its low permeability to gases present in the air.
- Complies with Directive 2004/42/EC on Volatile Organic Compounds (VOC)
*See all the product certifications in the Technical Datasheet.
Technical specifications
- Binder Acrylic copolymer in emulsion
- Diluent Water 0 - 10 %.
- Deep matte gloss
- Density (UNE-EN ISO 2811-1) 1.46 +/- 0,05 Kg/L
- Yield at 98% opacity 6 m2/L
- Drying times Drying to touch: 1 - 2 hours at 20º C. Recoat interval: 6 - 12 hours at 20º C.
*Technical specifications may vary depending on color, substrate, humidity or temperature.
Applications
- Exterior use: On facades, walls, exterior walls or light patios(concrete and its prefabricated products, mortars, cement, brick or fiber cement).
- Indoor use: On all types of interior walls and ceilings made with common construction materials(plaster, cement, mortar or plasterboard).
Instructions for use
The application should be made by brush, roller orairlessspray gun after homogenizing the product and dilution. The dilution of the product and cleaning of equipment and tools can be carried out using tap water before the paint dries. Once dry, cleaning solvent should be used.
Primer:
- On surfaces that present a firm, dry, absorbent and compact aspect, apply a coat of Eurotex colorless Eurofijador Eurotex diluting 1 part per 4 of water.
- If the substrate shows a lack of consistency and high absorption, apply Eurotex Waterproofing Sealer (solvent-based) diluted 25 to 75% with Eurosolv-X.
Finishing:
- Apply a first coat of Océano F1 Fachadas Premium, diluted 5 - 10 % with water. Let dry between coats about 6 - 12 hours depending on application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate) with a maximum dilution of 5% with water.
