Noveltex Silk Vinyl Silk - High Quality Vinyl Paint
SKU:Plastic paint with specially selected pigments and extenders that give it excellent durability, brushability, coverage and whiteness on walls executed with all types of materials(concrete, cement, brick or fiber cement), thus obtaining a smooth finish of the highest quality.
- Color White
- Extraordinary Class 2 washability
- 7 years warranty* 7 years warranty* 7 years warranty* 7 years warranty* 7 years warranty* 7 years warranty* 7 years warranty
- BS1D0 Reaction to Fire Certificate
- No yellowing
- Yield 6.40 m2/L
Description
Noveltex Silk Vinyl is a high quality vinyl paint, which offers outstanding washability and whiteness.
Main characteristics
- Excellent brightness and whiteness unalterability.
- Fully waterproof film.
- Extraordinary resistance to aging.
- Excellent whiteness, good coverage and easy application.
- Chemical resistance to not excessively alkaline substrates and aggressive environments.
- Extraordinary washability. Abrasion resistant film.
- High tenacity and flexibility, withstanding slight contractions of the substrate.
- Inorganic pigments stable to light, both artificial and natural, and to weathering.
- Non-toxic, pleasant odor and non-flammable.
- Non-yellowing.
Uses
- Exterior use: on facades built with common construction materials or light patios.
- Indoor use: to be applied in stairwells, corridors and all types of rooms in dwellings. Interior spaces in offices, public places or factories.
Technical specifications
- Vinyl-veova binder
- Diluent Water
- Color/Finish Snow White/Deep Matte
- Índice de brillo <5
- Density at 25 ºC 1.5 kg/L
- Classification wet scrub resistance Class 2
- Yield at 98% opacity (Class 2) 6.40 m2/L
- Drying time To touch: 30 min.
- Repainting interval Min. 3 hours.
*Technical specifications may vary depending on color, substrate, humidity or temperature.
Instructions for use
Treatment of the support
The substrate must be clean, dry, free of grease or contaminants, free of loose elements and free of areas affected by biodegradation that prevent the correct anchorage or affect the durability of the painting system.
On new cement, concrete or plaster surfaces:
- If the concrete presents saline efflorescence, neutralize previously with a 10-15% solution of hydrochloric acid in water, washing then with abundant water; procedure with which it is also achieved, to roughen the smooth concrete, and then, after drying, apply the product.
Surfaces already painted of concrete, mortar or fiber cement:
- Eliminate dust and disaggregable materials by mechanical or manual procedures.
- Painted surfaces in poor condition should be completely removed by high pressure water jet or more abrasive water jet.
- It is not recommended to use chemical products of an acid or alkaline nature for cleaning, as they could irreversibly damage the base substrate.
On other types of supports:
- The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
Product application
The application should be made by brush, roller or airless spray gun after homogenizing the product and dilution. The dilution of the product and cleaning of equipment and tools can be carried out using tap water before the paint dries. Once dry, cleaning solvent should be used.
Primer:
- On surfaces that present a firm, dry, absorbent and compact aspect, apply a coat of Eurotex colorless Eurofijador Eurotex diluting one part per 4 of water.
- If the substrate shows lack of consistency and high absorption, use instead Eurotex solvent-based water-repellent sealer diluted 25 - 75% with Eurosolv-X.
Finishing:
- Apply a first coat of Noveltex Silk Vinyl, diluting the product 20-25%. Let dry min. 3 hours between coats according to conditions and application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate), with a maximum dilution of 15% with water.
- For stucco, if it is in good condition, apply using a brush or wool roller (long hair), spreading the product correctly, starting from right to left and from top to bottom. The finishing coat will be diluted as much as the conditions of the work require it.
