Delta Facades Plus - High Quality Coating
SKU: d0dc31fc360bDelta Fachadas Plus is a coating of high quality and excellent durability, indicated for the decoration of facades. Designed for application on exteriors: walls, light courtyards, concrete, brick, fiber cement, blocks, industrial buildings or concrete facades. Also suitable for interior application.
- CE Marking Certificate
- 12-year warranty
- Washability Class 1
- BS1D0 Reaction to Fire Certificate
- Anti-Carbonation Test
- Self-cleaning
- Excellent whiteness
- Maximum impermeability
Description
Delta Fachadas Plus is considered by many, the best plastic paint for facades in the market; excellent quality available in a wide range of colors.
To speak of Eurotex Delta Fachadas Plus is to speak of the highest quality. Its long history in the market, as well as the excellent results obtained in countless jobs and projects, make it the plastic paint of reference in the sector.
It is a high-end 100% waterproof smooth coating for the protection and decoration of all types of facades. However, although this product is specially designed for exterior use, it is also suitable for use on interior surfaces such as public places, stairwells, corridors, rooms, offices, etc.
Main features of our Delta Facades Plus
- Extraordinary whiteness with no yellowing index. Good hiding power .
- Extraordinary resistance to aging.
- Completely impermeable film to rainwater. Resistant to weathering and ultraviolet rays.
- Chemical resistance to not excessively alkaline substrates and aggressive environments.
- Extraordinary washability. Self-cleaning by the action of rain.
- It has anti-carbonation properties and a very low permeability to gases present in the air.
- Excellent abrasion resistance.
- Waterproof and water vapor permeable, allowing the wall to breathe.
- Unsaponifiable.
- It is a water-based paint .
*Discover all the standards with which this product complies in its technical data sheet.
Technical specifications
- Stretch Acrylic Binder
- Diluent Water
- Deep matte finish
- Coverage power at 100 microns wet UNE-EN ISO 6504 98%.
- Theoretical yield at 100 wet microns 6-8 m2/kg depending on surface area
- Drying times (UNE 48086) Drying to touch: 1 - 2 hours at 20º C
- Repainting interval (UNE 48086) Minimum: 6 - 12 hours at 20º C
*Technical specifications may vary depending on color, substrate, humidity or temperature.
Main applications
The application can be made with brush, roller or spray gun, after shaking the product and dilution. The cleaning of equipment should be done with water before the paint dries. Once dry, the following should be used cleaning solvent.
- Outdoor use: Apply on facades, walls, exterior walls, light courtyards, etc.
- Indoor use: All types of interior walls and ceilings, on common construction materials (on plaster, cement, mortar, plasterboard, etc).
Instructions for use
Treatment of the support:
- New concrete surfaces: Allow concrete to set completely (28 days minimum). Remove setting laitance, soluble salts, dust, grease, oil and other contaminants by mechanical or manual procedures.
- Surfaces already painted of concrete or fiber cement: Eliminate dust and disaggregable materials by mechanical or manual procedures. Painted surfaces in poor condition should be completely removed using high pressure water machinery. Do not use chemical products of acid or alkaline nature in the cleaning works, since they could damage irreversibly the base support.
- On other types of substrates: The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
Product application:
- Primer: Apply a coat of Eurofijador Eurotex (water-based) diluted one part per 4 of water if the surface has a firm, dry, absorbent and compact aspect or EUROTEX WATER-REPELLENT SEALER (SOLVENT-BASED) diluted 25 to 75% of Eurosolv-X if the support presents a lack of consistency and high absorption.
- Finish: Apply a first coat of DELTA FACHADAS PLUS, diluted 10% with water. Let dry between coats about 6 - 12 hours depending on application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate) with a maximum dilution of 5% with water.
