Noveltex Satin - High Quality Vinyl Paint
SKU:Satin white plastic paint generally used as a coating for interior and exterior surfaces where a resistant and decorative finish is desired on common building materials (concrete and its prefabricated, mortars, cement, brick or fiber cement). Special for transit areas.
- High Class 2 Washability
- Altisalpicado Technology (NO dripping)
- Rain waterproof
- Reaction to fire Euroclass Bs1d0
- Weather resistant(good hardness)
- Easy application
Description
High Quality Vinyl Paint - Noveltex Satin, is a water-based paint of good hardness and performance (16m2/L coat).
Main features
- Rain waterproof
- Good whiteness index
- Good abrasion resistance
- Excellent washability
- Air and water vapor permeability
- Good resistance to the alkalinity of the support
- Weather and ultraviolet resistant film
- Easy homogenization upon opening the package and easy application
Where to use Noveltex Satin?
- Indoor use: for painting walls and ceilings of interior spaces in rooms in homes, offices, stores, public places or communities.
- Outdoor use: on facades of houses, commercial premises or patios.
Technical specifications
- Vinyl-veova binder
- Diluent Water
- Color/Finish White/Satin
- Classification wet scrub resistance Class 2
- Yield at 98% opacity 4m2/L
- Drying times Touch dry 30 min (at 25ºC) Recoating interval Minimum 4-8 hours (at 25ºC)
Treatment of the support
The substrate must be clean, dry, free of grease or contaminants, free of loose elements and free of areas affected by biodegradation that prevent the correct anchorage or affect the durability of the painting system.
New concrete surfaces: Allow concrete to set completely (28 days minimum). Remove setting laitance, soluble salts, greasy dust and other contaminants by mechanical or manual procedures.
Surfaces already painted of concrete, mortar or fiber cement: Remove dust and disaggregable materials by mechanical or manual procedures. Painted surfaces in bad condition should be completely removed by high pressure water jet or more abrasive water jet. It is not recommended to use chemical products of acid or alkaline nature in the cleaning works, since they could irreversibly damage the base support.
On other types of substrates: The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
Instructions for use
The application should be made by brush, roller orairlessspray gun after homogenizing the product and dilution. The dilution of the product and cleaning of equipment and tools can be carried out using tap water before the paint dries. Once dry, cleaning solvent should be used.
Primer:
- On surfaces that present a firm, dry, absorbent and compact aspect, apply a coat of Eurotex colorless Eurofixer diluting one part per 4 of water.
- If the substrate shows lack of consistency and high absorption, use in its place Eurotex water-repellent sealer solvent-based diluted 25 - 75% with Eurosolv-X.
Finishing:
- Apply a first coat of Noveltex Satin, diluting the product by 5 %. Let dry 6 - 12 hours between coats according to conditions and application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate), with a maximum dilution of 5% with water if necessary.
