Silicone Coating - Ocean F40 14L.
SKU: 45031Siloxane plasticpaint has a great resistance to difficult weather conditions, good whiteness and covering power in facades executed with construction materials(concrete, cement, brick or fiber cement) achieving an improved high quality finish thanks to its hydrophobicity and water repellent effect.
- BS1D0 Reaction to Fire Certificate
- Self-cleaning by rain action
- Mold resistant
- Theoretical yield: 8m2/liter
- Use: Outdoor-Indoor
- Washability Class 2
Description
Protect your wall from dirt and water thanks to its hydrophobicity and water repellent effect; our siliconized coating is suitable for indoor and outdoor use.
Main product features
- Highly impermeable to rainwater and breathable to air and water vapor.
- Good hiding power.
- Good whiteness index.
- Good washability. Self-cleaning by the simple action of rain.
- Very good resistance to erosion.
- High tenacity and flexibility, withstanding slight contractions of the substrate.
- Good resistance to the alkalinity of the support.
- Weather and UV resistant film.
- Very good friction resistance.
- Inorganic pigments totally stable to light and weathering.
- Formulated with film protection additives against mold and mildew.
Technical specifications
- Binder Siliconized acrylic copolymer
- Diluent Water
- Color White
- Deep matte gloss
- Yield at 98% opacity (UNE-EN 1300, class 2) 8 m2/L
- Tiempos de secado Secado al tacto: <1h a 25ºC
- Repainting interval Approx. 2-3 hours
- Washability Class 2
Applications
- Outdoors: On building facades, for decoration and protection, patios of lights, etc.
- Indoors: In all types of rooms, on any wall, vertical or horizontal, especially those prone to condensation and mildew, such as kitchens or bathrooms. those prone to condensation and mildew, such as kitchens or bathrooms.
Instructions for use
- Treatment of the support.
The substrate must be clean, dry, free of grease or contaminants, free of loose elements and free of areas affected by biodegradation that prevent the correct anchorage or affect the durability of the painting system.
New concrete surfaces: Allow concrete to set completely (28 days minimum). Remove setting laitance, soluble salts, dust, grease, oil and other contaminants by mechanical or manual procedures.
Surfaces already painted of concrete or fiber cement: Eliminate dust and disaggregable materials by mechanical or manual procedures. Painted surfaces in poor condition should be completely removed using high pressure water machinery. Do not use chemical products of acid or alkaline nature in the cleaning works, since they could damage irreversibly the base support.
On other types of substrates: The solidity and anchorage of the paint must be previously checked and the nature of the substrate must be diagnosed in order to avoid possible incompatibilities. Eurotex cannot guarantee the performance of the paint on other products.
- Product application.
Primer: Apply a coat of Siloxane fixative sealer (WATERBASED)..
- To fix base coats, dilute with water in the proportion of 1 part of Siloxane watery fixative and 1 part of water. If necessary, apply a second coat, in the same ratio 1:1.
- As a bridge primer, apply the product as it is used or dilute with water in the proportion of 1 part of Siloxane aqueous sealer 1 part of water.
Finishing: Apply a first coat of Ocean F40 Silicone Coating, diluted between 5 - 10 % with water. Let dry between coats about 6 - 12 hours depending on application conditions. Then apply one or two finishing coats (depending on the characteristics of the substrate) diluted or not, as required by the conditions of the work, to achieve a good waterproofing.
On stucco, it will be applied using a brush or long-haired wool roller, spreading the product well, from right to left and from top to bottom.
