Pu Membrane Varnish
SKU:Request a quote
Single-component aliphatic polyurethane-based finishing varnish for protection of liquid waterproofing membranes (polyurethanes and aromatic polyureas). It reacts with environmental humidity, obtaining continuous, flexible and hard coatings at the same time, with high chemical and mechanical performance. Its aliphatic polyurethane nature ensures total color stability.
- CE Marked
- Color/Finish Gray RAL 7001/Glossy
- Total color stability to UV radiation
- Excellent abrasion, wear and scratch resistance
Description
Other properties
- Good adhesion on a multitude of surfaces
- Maximum weather resistance.
- Good coverage
- Fast curing and repainting
Technical specifications
- Color Gray RAL 7001
- Finish / Gloss Glossy / Gloss 60º C = 50 %.
- Yield 400-600 g/m2
- Mechanical properties Maximum elongation: 70 %.
- Resistencia térmica <80 ºC
- Anti-slip properties (UNE EN 12633-2003) Class 1: no dusting of aggregate. Class 3: dusting of aggregate 0.4-0.9 mm (1 Kg/m3).
*Technical specifications may vary depending on color, substrate, humidity or temperature.
Main uses
- Areas with vehicular traffic depending on the scheme used(garages, parking lots).
- Industrial buildings.
- Recreational and sports areas.
- Protective coating of epoxy mortars.
- Protective finish for waterproofing membranes of aromatic nature.
- Protective finish for anti-corrosive metal systems.
Application data
- Pot life 20ºC, 50% RH 2 hours (the container forms a skin on the top)
- Yield (PU membrane protection) 400 - 600 g/m2
- Thinner/cleaner Eurotex synthetic solvent (100% Xylene). Once hardened it cannot be dissolved
- Airless spray gun: Adjust the viscosity with Eurotex synthetic solvent in such a way as not to generate to avoid microfoam generation in order to obtain a suitable finish. proper finish
- Brush, roller, spray gun Dilution: 0 - 5%. (Do not use universal solvents)
